#ChemSummer Carnival – Glow Sticks: How Do They Work?

Via Kenneth Freeman

Read other entries in the How Does it Work? series!

This post is part of the #ChemSummer carnival hosted by C&ENews and Rachel Pepling.

Everybody loves summer. And as the sun starts to set, and the fireflies twinkle, and bedtimes are some ancient school-day memory, you crack a glow stick and are amused for hours… and your parents have a way to keep an eye on you.

But how do these wonders of creation work? Why do I have to ‘break’ it before it lights up? How come it doesn’t last forever? Chemistry, my child. Chemistry.

If you were with me when we talked about how Cold-Activated Bottles work (go ask your dad what beer is), we talked about how alkenes absorb light in the ultraviolet region of the electromagnetic spectrum. The alkene will absorb one wavelength better than any others, and we call that λmax. As you chain more and more alkenes together in conjugation, the molecule will absorb longer and longer wavelengths of light, and λmax will increase with the number of pi bonds in conjugation.

lambdamax

 

Eventually with enough conjugated alkenes, λmax breaks the 400 nm barrier and starts absorbing visible light. Because of subtractive color, white light hits the object, the object absorbs light at λmax, and the rest of the light bounces off into your eye, so we see all the colors that remain after λmax is absorbed. So when lycopene in tomatoes has a λmax of 471 nm, the rest of the light reflected back looks red.

So that’s a bit on how color works, what about how light works?

via Jacobkhed

For something to radiate light, it needs to emit a photon. Incandescent light bulbs work by heating up a filament until it glows and emits photons as a result of the high temperature of the filament (incandescence). Glow-in-the-dark stickers and things that glow under a black light work because a chemical (a fluorophore) absorbs energy from ambient light and excites an electron. When this electron relaxes back down to its ground state, it emits a photon of light. If this relaxation takes a long time to occur, the sticker will continue to emit light even after the lights have been turned off (fluorescence and phosphorescence).

But a glow stick is different. It is similar to fluorescence in that an excited electron is relaxing down to a ground state and emitting a photon, but it is different in how that electron gets excited in the first place. A glow stick doesn’t glow because of incandescence or fluorescence or phosphorescence, it glows because of chemiluminescence. The energy used to excite the electron comes as a byproduct of a chemical reaction. Some chemical reactions release energy as they occur. Most of the time that energy is expressed as thermal energy (heat), but sometimes another molecule absorbs that energy and excites an electron. When the electron relaxes, it emits a photon.

So this sets us up to discuss what we need to make a glow stick. We need a chemical reaction which releases energy. We need a chemical which can absorb that energy and excite an electron. And that same chemical needs to emit a photon of visible light when that electron relaxes to the ground state.

Most modern glow sticks contain all of these components. The reaction which releases energy is the reaction of a diaryl oxalate with hydrogen peroxide. This produces 1,2-dioxetanedione as a highly unstable intermediate. This intermediate decomposes to two molecules of carbon dioxide and releases energy. The glow stick also contains an unreactive molecule which can absorb this energy and excite an electron. When the electron relaxes back to its ground state, it emits a photon. Depending on the structure of this molecule, different colors of glow can be achieved. When the reagents have been completely consumed and the reaction ceases, then no more energy is being released, and no more glowing occurs, and the glow stick goes dark.

GlowStick

But why do I need to break it first? Remember that this is a chemical reaction, and when the reagents have been consumed, the reaction is over. If the manufacturers were to mix all three ingredients together from the start, the reaction would occur during manufacturing and shipment, and by the time you open it the reaction would be complete – there’d be no glow. So we need some way to not have the reaction occur during shipment, and only occur when I’m ready for it to occur. So we need to physically separate the diaryl oxalate and the hydrogen peroxide from each other until we’re ready for glow. To achieve this, your glow stick is actually two concentric cylinders. The outer, flexible, plastic cylinder contains the diaryl oxalate and the dye molecule. Within this cylinder is an inner, glass cylinder containing hydrogen peroxide. Flexing the outer plastic cylinder causes the inner glass cylinder to break, releasing the hydrogen peroxide. When the hydrogen peroxide mixes with the diaryl oxalate, the reaction is able to occur and the glow stick starts glowing.

GSColors

Will it really last longer if I put it in the freezer? Yes, kind of. The glow is a result of that chemical reaction. Reaction rates can be influenced by temperature. If the temperature is colder, the reaction proceeds slower. If the reaction proceeds slower, the energy is released over a longer period of time, and the glow lasts for a longer time. But if you’re handling the glow stick and waving it around and holding it in your hands, it will warm up pretty quickly and revert to its typical life time.

Glow sticks have a lot of very attractive benefits that have not gone unnoticed. A glow stick is water proof – as long as you don’t puncture the outer plastic tube, a glow stick will work just fine underwater. A glow stick does not need any batteries or external energy source to give off light. The light-emitting phenomenon is completely self-contained. It does not generate an appreciable amount of heat or give off sparks, and it is reasonably inexpensive and disposable. Given these benefits, it is considered the only safe light source to use following some kind of disaster scenario, natural or otherwise. There is no need for external power, and it can withstand most weather conditions. Who knew this little red ring around your neck was so important for first responders, too.

So is this how fireflies work, too? Kinda. Fireflies contain a molecule called luciferin which reacts with atmospheric oxygen to form a similarly strained cyclic 1,2-dioxetane. This decomposes to carbon dioxide and an excited state form of oxyluciferin which relaxes to its ground state and emits that characteristic yellowish glow of a firefly.

Firefly

Now, child, go run along and play. We can talk about how sparklers work next week (hint: it’s magnesium. And chemistry.)

5 Comments

  1. Pingback: The Dog Days of #ChemSummer | Grand CENtral

  2. I’m doing a talk about fireflies at a camp this summer and would love to include the last image of this post just to point out that while we take fireflies lighting up for granted, it’s actually a very complex and interesting process taking place, I would of course include credit for the image pointing to your website if my use would be allowed. Thank you for your consideration.

  3. Pingback: The Chemistry of Glow Sticks | Compound Interest

  4. Jeff Gaby’s;las says:

    Hi my name is Jeff

Leave a Reply

Your email address will not be published. Required fields are marked *